Product Overview
The Onkyo TX-NR696 is a 7.2-channel AV receiver offering 175W per channel‚ Dolby Atmos‚ DTS:X‚ and built-in Wi-Fi for immersive audio and seamless connectivity.
1.1 Key Features of the Onkyo TX-NR696
- 7.2-channel AV receiver with 175W per channel output at 8 Ohms.
- Supports Dolby Atmos and DTS:X for immersive soundscapes.
- Equipped with Wi-Fi and Bluetooth for wireless connectivity.
- Multi-zone audio control for flexible home entertainment setups.
- Includes a calibration microphone for precise audio tuning.
- THX Certified Select for high-fidelity audio performance.
1.2 Technical Specifications
- Power Output: 175W per channel at 8 Ohms.
- Channels: 7.2-channel AV receiver.
- Impedance: 8 Ohms.
- Supported Formats: Dolby Atmos‚ DTS:X.
- Frequency Response: 20Hz–20kHz.
- THD: 0.08% (1kHz‚ 1CH Driven).
1.3 Included Accessories
- Calibration Microphone: For accurate speaker setup.
- Remote Controller: RC-972R model with batteries.
- Antennas: FM and AM antennas.
- Instruction Manual: English version.
- Batteries: AAA/R03 for remote.
Setup and Installation Guide
Easy step-by-step instructions for connecting components‚ speaker setup‚ and initial calibration using the included microphone ensure a smooth installation and optimal audio performance.
2.1 Connecting Speakers and Components
Connect front speakers to the power amplifier and use the PRE OUT FRONT jacks for bi-amping. Ensure all components are securely linked via HDMI or optical inputs. The included FM and AM antennas‚ calibration microphone‚ and remote control simplify setup. Refer to the manual for detailed wiring diagrams and optimal connections to achieve precise audio synchronization and enhanced performance.
2.2 Initial Setup and Calibration
Begin by powering on the receiver and following the on-screen instructions. Use the calibration microphone to optimize speaker settings automatically. Ensure the microphone is placed at listening height and position. The system will detect speaker distances‚ levels‚ and crossover frequencies‚ adjusting for balanced sound. After calibration‚ review settings manually if needed to fine-tune the audio experience for your room’s acoustics.
2.3 Using the Calibration Microphone
Place the calibration microphone at your primary listening position‚ ensuring it is level and at ear height. Connect it to the Calibration Mic input on the receiver. Start the AccuEQ calibration process via the on-screen menu. Remain silent during the process as the system emits test tones to measure speaker response. Once complete‚ the receiver will automatically adjust speaker levels‚ distances‚ and crossover settings for optimal sound performance tailored to your room’s acoustics.
Audio and Video Settings
Configure audio channels‚ enable immersive formats like Dolby Atmos and DTS:X‚ and use the manual equalizer to fine-tune sound settings for a tailored home theater experience.
3.1 Configuring Audio Output Channels
The Onkyo TX-NR696 supports 7.2 audio output channels‚ enabling immersive surround sound. Connect speakers to the appropriate terminals‚ ensuring correct channel assignments. Use the receiver’s setup menu to configure output settings‚ selecting the right speaker configuration for your system. For HDMI output‚ assign the correct audio format to match your TV or external devices. Adjust settings like speaker size‚ crossover frequency‚ and levels to optimize performance. Ensure proper calibration using the included microphone for balanced sound across all channels.
3.2 Using the Manual Equalizer
Access the manual equalizer via the receiver’s menu to adjust frequency levels for a customized listening experience. Select from Preset 1 to Preset 3‚ each configured during initial setup. Use the remote to fine-tune bass‚ midrange‚ and treble levels across different frequencies. Save your settings to preserve the custom equalization curve. This feature allows precise control over audio reproduction‚ ensuring optimal sound quality tailored to your preferences and speaker setup.
3.3 Enabling Dolby Atmos and DTS:X
To enable Dolby Atmos and DTS:X on the Onkyo TX-NR696‚ navigate to the Audio Settings menu. Select Surround Mode and choose Dolby Atmos or DTS:X based on your content. Ensure your speakers are correctly configured for object-based audio. A calibration process may be required for optimal performance. This setup ensures immersive soundscapes with enhanced spatial dynamics‚ delivering a cinematic experience in your home theater.
Advanced Features
The Onkyo TX-NR696 offers advanced features like network connectivity‚ Wi-Fi setup‚ and multi-zone audio control‚ enhancing your home theater experience with seamless integration and customization options.
4.1 Network Connectivity and Wi-Fi Setup
The Onkyo TX-NR696 supports Wi-Fi and network connectivity‚ enabling wireless audio streaming via Chromecast‚ AirPlay‚ and Spotify. Connect to your home network using the WPS button or manual SSID entry. Ensure stable connection by placing the router near the receiver. For troubleshooting‚ refer to the manual’s network section to resolve connectivity issues and optimize streaming performance.
4.2 Firmware Update Process
To update the Onkyo TX-NR696’s firmware‚ navigate to the Settings menu and select Firmware Update. Ensure the receiver is connected to the internet via Wi-Fi or Ethernet. The device will check for available updates and prompt you to download and install the latest version. Do not interrupt the process. Once complete‚ restart the receiver to apply the update. Regular updates ensure optimal performance and new features.
4.3 Multi-Zone Audio Control
The Onkyo TX-NR696 supports multi-zone audio control‚ allowing independent audio playback in up to three zones. Use the receiver’s menu to configure Zone 2 and Zone 3‚ enabling different sources for each area. Adjust volume levels and enable/disable zones through the remote or on-screen display. This feature enhances flexibility for whole-home audio distribution‚ ensuring seamless entertainment across multiple spaces.
Troubleshooting Common Issues
Identify and resolve connection problems‚ audio delays‚ or sync issues using the calibration microphone and on-screen guides. Regular firmware updates ensure optimal performance and bug fixes.
5.1 Identifying and Resolving Connection Problems
Check speaker and HDMI connections for proper wiring. Ensure all cables are securely plugged in and not damaged. Use the calibration microphone for accurate audio setup. Restart the receiver and connected devices to resolve temporary glitches. If issues persist‚ refer to the manual or update the firmware to the latest version for improved compatibility and performance.
5.2 Solving Audio Delay or Sync Issues
Adjust the audio delay settings in the receiver’s menu to synchronize sound with video. Enable Lip Sync feature if available. Check HDMI connections for stability and use high-quality cables. Ensure all devices are updated with the latest firmware. If issues persist‚ reset the receiver to factory settings and recalibrate audio settings for optimal performance.
5.3 Updating Firmware for Enhanced Performance
To update the firmware‚ connect the receiver to a Wi-Fi network and navigate to the Settings menu. Select Firmware Update and follow on-screen instructions to download and install the latest version. Ensure the unit remains powered on during the update process. Regular firmware updates improve performance‚ add features‚ and fix bugs. Refer to the manual for detailed steps or visit the official Onkyo website for the latest firmware versions.
The Onkyo TX-NR696 offers exceptional audio quality with 7.2 channels‚ Dolby Atmos‚ and DTS:X. For more details‚ visit the official Onkyo website or contact support.
6.1 Summary of Key Features and Benefits
The Onkyo TX-NR696 is a 7.2-channel AV receiver delivering 175W per channel‚ supporting Dolby Atmos and DTS:X for immersive sound. It features Wi-Fi‚ AirPlay‚ and Bluetooth for wireless streaming‚ along with multi-zone audio control. The receiver includes a calibration microphone for precise sound optimization and supports 4K HDR video pass-through. Its robust connectivity options and high-quality audio performance make it ideal for home theaters. Additional features like Sonos and DTS Play-Fi enhance its versatility.
6.2 Where to Find More Information
For detailed information‚ visit the official Onkyo website‚ where you can download the TX-NR696 manual in PDF format. Additional resources include product specifications‚ setup guides‚ and firmware updates. The Onkyo support page also offers troubleshooting tips and FAQs. Authorized retailers may provide supplementary materials‚ ensuring comprehensive understanding and optimal use of the receiver’s features. Explore these resources to unlock the full potential of your Onkyo TX-NR696.
6.3 Contacting Onkyo Support
For assistance with the Onkyo TX-NR696‚ visit the official Onkyo website and navigate to the support section. Use the contact form‚ phone‚ or email options for direct inquiries. Regional support offices are also available for localized assistance. Additionally‚ the website provides access to firmware updates‚ troubleshooting guides‚ and FAQs. For urgent issues‚ refer to the manual or contact Onkyo’s customer service team for professional guidance. Ensure to have your product details ready for efficient support.